[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38 (root@linux) (gcc version 4.4.3 (GCC) ) #1 SMP Mon Mar 28 23:47:49 CEST 2011 [ 0.000000] Command line: BOOT_IMAGE=2.6.38 root=UUID=555b7d90-7e6a-4e3f-8e3a-9d0078bd52e3 resume=UUID=de4db2a3-e111-4a90-aa6f-aaa48612213b splash=silent vga=788 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf5b0000 (usable) [ 0.000000] BIOS-e820: 00000000cf5b0000 - 00000000cf5e3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf5e3000 - 00000000cf5f0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf5f0000 - 00000000cf600000 (reserved) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000012c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. Q35M-S2/Q35M-S2, BIOS F2 11/19/2007 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x12c000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CAFFF write-protect [ 0.000000] CB000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 0CF800000 mask FFF800000 uncachable [ 0.000000] 4 base 0CF700000 mask FFFF00000 uncachable [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 base 130000000 mask FF0000000 uncachable [ 0.000000] 7 base 12C000000 mask FFC000000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cf700000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcf5b0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f5390] f5390 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cf5b0000 [ 0.000000] 0000000000 - 00cf400000 page 2M [ 0.000000] 00cf400000 - 00cf5b0000 page 4k [ 0.000000] kernel direct mapping tables up to cf5b0000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000012c000000 [ 0.000000] 0100000000 - 012c000000 page 2M [ 0.000000] kernel direct mapping tables up to 12c000000 @ cf5aa000-cf5b0000 [ 0.000000] RAMDISK: 37a7d000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f71c0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cf5e3040 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cf5e30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cf5e3180 05854 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cf5b0000 00040 [ 0.000000] ACPI: ASF! 00000000cf5e8b40 0008A (v16 GBT GBTUACPI 42302E31 GBTU 00000000) [ 0.000000] ACPI: HPET 00000000cf5e8c40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cf5e8cc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cf5e8a40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000cf5e8dc0 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.000000] ACPI: SSDT 00000000cf5e9370 00275 (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000012c000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000012c000000 [ 0.000000] NODE_DATA [000000012bffb000 - 000000012bffffff] [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880127e00000-ffff88012b7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0012c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cf5b0 [ 0.000000] 0: 0x00100000 -> 0x0012c000 [ 0.000000] On node 0 totalpages: 1029439 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 830952 pages, LIFO batch:31 [ 0.000000] Normal zone: 2464 pages used for memmap [ 0.000000] Normal zone: 177760 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cf5b0000 - 00000000cf5e3000 [ 0.000000] PM: Registered nosave memory: 00000000cf5e3000 - 00000000cf5f0000 [ 0.000000] PM: Registered nosave memory: 00000000cf5f0000 - 00000000cf600000 [ 0.000000] PM: Registered nosave memory: 00000000cf600000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cf200000 s82496 r8192 d24000 u524288 [ 0.000000] pcpu-alloc: s82496 r8192 d24000 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012633 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=2.6.38 root=UUID=555b7d90-7e6a-4e3f-8e3a-9d0078bd52e3 resume=UUID=de4db2a3-e111-4a90-aa6f-aaa48612213b splash=silent vga=788 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3976152k/4915200k available (4118k kernel code, 797444k absent, 141604k reserved, 3755k data, 748k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2826.516 MHz processor. [ 0.010004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5653.03 BogoMIPS (lpj=28265160) [ 0.010010] pid_max: default: 32768 minimum: 301 [ 0.010131] Security Framework initialized [ 0.010154] TOMOYO Linux initialized [ 0.010471] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012259] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013120] Mount-cache hash table entries: 256 [ 0.013555] Initializing cgroup subsys ns [ 0.013561] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.013565] Initializing cgroup subsys cpuacct [ 0.013603] Initializing cgroup subsys memory [ 0.013622] Initializing cgroup subsys devices [ 0.013625] Initializing cgroup subsys freezer [ 0.013628] Initializing cgroup subsys net_cls [ 0.013630] Initializing cgroup subsys blkio [ 0.013684] CPU: Physical Processor ID: 0 [ 0.013687] CPU: Processor Core ID: 0 [ 0.013690] mce: CPU supports 6 MCE banks [ 0.013698] CPU0: Thermal monitoring enabled (TM2) [ 0.013702] using mwait in idle threads. [ 0.014764] ACPI: Core revision 20110112 [ 0.023065] ftrace: allocating 16401 entries in 65 pages [ 0.028775] Setting APIC routing to flat [ 0.029072] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.129100] CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07 [ 0.130000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.130000] ... version: 2 [ 0.130000] ... bit width: 40 [ 0.130000] ... generic registers: 2 [ 0.130000] ... value mask: 000000ffffffffff [ 0.130000] ... max period: 000000007fffffff [ 0.130000] ... fixed-purpose events: 3 [ 0.130000] ... event mask: 0000000700000003 [ 0.130000] Booting Node 0, Processors #1 #2 #3 Ok. [ 0.630005] Brought up 4 CPUs [ 0.630009] Total of 4 processors activated (22610.72 BogoMIPS). [ 0.632314] devtmpfs: initialized [ 0.632736] Time: 22:17:27 Date: 03/28/11 [ 0.632736] NET: Registered protocol family 16 [ 0.632736] ACPI: bus type pci registered [ 0.632736] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xd0000000-0xdfffffff] (base 0xd0000000) [ 0.632736] PCI: MMCONFIG at [mem 0xd0000000-0xdfffffff] reserved in E820 [ 0.668577] PCI: Using configuration type 1 for base access [ 0.668878] bio: create slab at 0 [ 0.670071] ACPI: EC: Look up EC in DSDT [ 0.673360] ACPI: SSDT 00000000cf5e91c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.673518] ACPI: Dynamic OEM Table Load: [ 0.673522] ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.673614] ACPI: SSDT 00000000cf5e9250 00087 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.673767] ACPI: Dynamic OEM Table Load: [ 0.673770] ACPI: SSDT (null) 00087 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.673859] ACPI: SSDT 00000000cf5e92e0 00087 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.674012] ACPI: Dynamic OEM Table Load: [ 0.674016] ACPI: SSDT (null) 00087 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.674131] ACPI: Interpreter enabled [ 0.674135] ACPI: (supports S0 S3 S4 S5) [ 0.674150] ACPI: Using IOAPIC for interrupt routing [ 0.677709] ACPI: No dock devices found. [ 0.677712] HEST: Table not found. [ 0.677716] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.677759] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.677843] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.677846] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.677848] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.677850] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.677851] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff] (ignored) [ 0.677853] pci_root PNP0A03:00: host bridge window [mem 0xcf600000-0xfebfffff] (ignored) [ 0.677861] pci 0000:00:00.0: [8086:29b0] type 0 class 0x000600 [ 0.677890] pci 0000:00:02.0: [8086:29b2] type 0 class 0x000300 [ 0.677898] pci 0000:00:02.0: reg 10: [mem 0xf3100000-0xf317ffff] [ 0.677902] pci 0000:00:02.0: reg 14: [io 0xe300-0xe307] [ 0.677906] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref] [ 0.677910] pci 0000:00:02.0: reg 1c: [mem 0xf3000000-0xf30fffff] [ 0.677955] pci 0000:00:19.0: [8086:10bd] type 0 class 0x000200 [ 0.677969] pci 0000:00:19.0: reg 10: [mem 0xf3180000-0xf319ffff] [ 0.677976] pci 0000:00:19.0: reg 14: [mem 0xf31a5000-0xf31a5fff] [ 0.677983] pci 0000:00:19.0: reg 18: [io 0xe400-0xe41f] [ 0.678022] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.678025] pci 0000:00:19.0: PME# disabled [ 0.678040] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 [ 0.678074] pci 0000:00:1a.0: reg 20: [io 0xe000-0xe01f] [ 0.678110] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 [ 0.678144] pci 0000:00:1a.1: reg 20: [io 0xe100-0xe11f] [ 0.678179] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 [ 0.678214] pci 0000:00:1a.2: reg 20: [io 0xe200-0xe21f] [ 0.678252] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 [ 0.678266] pci 0000:00:1a.7: reg 10: [mem 0xf31a4000-0xf31a43ff] [ 0.678333] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 [ 0.678345] pci 0000:00:1b.0: reg 10: [mem 0xf31a0000-0xf31a3fff 64bit] [ 0.678388] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.678391] pci 0000:00:1b.0: PME# disabled [ 0.678407] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 [ 0.678450] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.678453] pci 0000:00:1c.0: PME# disabled [ 0.678469] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604 [ 0.678512] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.678515] pci 0000:00:1c.1: PME# disabled [ 0.678536] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 [ 0.678571] pci 0000:00:1d.0: reg 20: [io 0xe500-0xe51f] [ 0.678606] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 [ 0.678640] pci 0000:00:1d.1: reg 20: [io 0xe600-0xe61f] [ 0.678675] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 [ 0.678710] pci 0000:00:1d.2: reg 20: [io 0xe700-0xe71f] [ 0.678749] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 [ 0.678762] pci 0000:00:1d.7: reg 10: [mem 0xf31a6000-0xf31a63ff] [ 0.678826] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.678871] pci 0000:00:1f.0: [8086:2914] type 0 class 0x000601 [ 0.678936] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.678942] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.678947] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.678952] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.678956] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b) [ 0.678990] pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106 [ 0.679005] pci 0000:00:1f.2: reg 10: [io 0xe800-0xe807] [ 0.679011] pci 0000:00:1f.2: reg 14: [io 0xe900-0xe903] [ 0.679017] pci 0000:00:1f.2: reg 18: [io 0xea00-0xea07] [ 0.679024] pci 0000:00:1f.2: reg 1c: [io 0xeb00-0xeb03] [ 0.679030] pci 0000:00:1f.2: reg 20: [io 0xec00-0xec1f] [ 0.679036] pci 0000:00:1f.2: reg 24: [mem 0xf31a7000-0xf31a77ff] [ 0.679062] pci 0000:00:1f.2: PME# supported from D3hot [ 0.679065] pci 0000:00:1f.2: PME# disabled [ 0.679078] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.679090] pci 0000:00:1f.3: reg 10: [mem 0xf31a8000-0xf31a80ff 64bit] [ 0.679107] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.679175] pci 0000:01:00.0: [1095:3132] type 0 class 0x000180 [ 0.679199] pci 0000:01:00.0: reg 10: [mem 0xf1004000-0xf100407f 64bit] [ 0.679218] pci 0000:01:00.0: reg 18: [mem 0xf1000000-0xf1003fff 64bit] [ 0.679230] pci 0000:01:00.0: reg 20: [io 0xc000-0xc07f] [ 0.679253] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.679291] pci 0000:01:00.0: supports D1 D2 [ 0.679310] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.679322] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.679326] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 0.679329] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.679334] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.679381] pci 0000:02:00.0: [197b:2368] type 0 class 0x000101 [ 0.679408] pci 0000:02:00.0: reg 10: [io 0xd000-0xd007] [ 0.679420] pci 0000:02:00.0: reg 14: [io 0xd100-0xd103] [ 0.679432] pci 0000:02:00.0: reg 18: [io 0xd200-0xd207] [ 0.679444] pci 0000:02:00.0: reg 1c: [io 0xd300-0xd303] [ 0.679456] pci 0000:02:00.0: reg 20: [io 0xd400-0xd40f] [ 0.679521] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.679532] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.679536] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.679539] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf2ffffff] [ 0.679543] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.679593] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 0.679598] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.679601] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.679605] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.679607] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.679609] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode) [ 0.679622] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.679720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.679743] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.679778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.679842] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.686676] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.686715] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.686753] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) [ 0.686790] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.686827] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) [ 0.686864] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.686901] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.686939] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.687012] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.687023] vgaarb: loaded [ 0.687072] PCI: Using ACPI for IRQ routing [ 0.687072] PCI: pci_cache_line_size set to 64 bytes [ 0.687072] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.687072] reserve RAM buffer: 00000000cf5b0000 - 00000000cfffffff [ 0.687072] NetLabel: Initializing [ 0.687072] NetLabel: domain hash size = 128 [ 0.687072] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.687072] NetLabel: unlabeled traffic allowed by default [ 0.687072] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.687072] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.687072] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.710021] Switching to clocksource hpet [ 0.715047] pnp: PnP ACPI init [ 0.715067] ACPI: bus type pnp registered [ 0.715146] pnp 00:00: [bus 00-ff] [ 0.715148] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.715150] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.715151] pnp 00:00: [io 0x0d00-0xffff window] [ 0.715153] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.715155] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.715156] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.715158] pnp 00:00: [mem 0xcf600000-0xfebfffff window] [ 0.715212] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.715270] pnp 00:01: [io 0x0010-0x001f] [ 0.715272] pnp 00:01: [io 0x0022-0x003f] [ 0.715273] pnp 00:01: [io 0x0044-0x004d] [ 0.715275] pnp 00:01: [io 0x0050-0x005f] [ 0.715276] pnp 00:01: [io 0x0062-0x0063] [ 0.715277] pnp 00:01: [io 0x0065-0x006f] [ 0.715278] pnp 00:01: [io 0x0074-0x007f] [ 0.715280] pnp 00:01: [io 0x0091-0x0093] [ 0.715281] pnp 00:01: [io 0x00a2-0x00bf] [ 0.715282] pnp 00:01: [io 0x00e0-0x00ef] [ 0.715284] pnp 00:01: [io 0x04d0-0x04d1] [ 0.715285] pnp 00:01: [io 0x0290-0x029f] [ 0.715286] pnp 00:01: [io 0x0800-0x0805] [ 0.715288] pnp 00:01: [io 0x0290-0x0294] [ 0.715289] pnp 00:01: [io 0x0880-0x088f] [ 0.715347] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.715351] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.715354] system 00:01: [io 0x0800-0x0805] has been reserved [ 0.715357] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.715360] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.715364] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.715373] pnp 00:02: [dma 4] [ 0.715374] pnp 00:02: [io 0x0000-0x000f] [ 0.715376] pnp 00:02: [io 0x0080-0x0090] [ 0.715377] pnp 00:02: [io 0x0094-0x009f] [ 0.715378] pnp 00:02: [io 0x00c0-0x00df] [ 0.715401] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.715437] pnp 00:03: [irq 0 disabled] [ 0.715445] pnp 00:03: [irq 8] [ 0.715447] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.715473] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.715492] pnp 00:04: [io 0x0070-0x0073] [ 0.715515] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.715522] pnp 00:05: [io 0x0061] [ 0.715546] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.715553] pnp 00:06: [io 0x00f0-0x00ff] [ 0.715557] pnp 00:06: [irq 13] [ 0.715584] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.715670] pnp 00:07: [io 0x03f0-0x03f5] [ 0.715672] pnp 00:07: [io 0x03f7] [ 0.715676] pnp 00:07: [irq 6] [ 0.715677] pnp 00:07: [dma 2] [ 0.715710] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.715832] pnp 00:08: [io 0x03f8-0x03ff] [ 0.715836] pnp 00:08: [irq 4] [ 0.715878] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.716007] pnp 00:09: [io 0x02f8-0x02ff] [ 0.716011] pnp 00:09: [irq 3] [ 0.716052] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.716186] pnp 00:0a: [io 0x0378-0x037f] [ 0.716190] pnp 00:0a: [irq 7] [ 0.716228] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.716293] pnp 00:0b: [io 0x0060] [ 0.716295] pnp 00:0b: [io 0x0064] [ 0.716299] pnp 00:0b: [irq 1] [ 0.716324] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.716356] pnp 00:0c: [io 0x0400-0x04bf] [ 0.716395] system 00:0c: [io 0x0400-0x04bf] could not be reserved [ 0.716400] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.716535] pnp 00:0d: [mem 0xd0000000-0xdfffffff] [ 0.716580] system 00:0d: [mem 0xd0000000-0xdfffffff] has been reserved [ 0.716584] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.716687] pnp 00:0e: [mem 0x000cb400-0x000cbfff] [ 0.716691] pnp 00:0e: [mem 0x000f0000-0x000f7fff] [ 0.716693] pnp 00:0e: [mem 0x000f8000-0x000fbfff] [ 0.716694] pnp 00:0e: [mem 0x000fc000-0x000fffff] [ 0.716696] pnp 00:0e: [mem 0xcf5b0000-0xcf5fffff] [ 0.716697] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.716698] pnp 00:0e: [mem 0x00100000-0xcf5affff] [ 0.716700] pnp 00:0e: [mem 0xfec00000-0xfec00fff] [ 0.716701] pnp 00:0e: [mem 0xfed10000-0xfed1dfff] [ 0.716703] pnp 00:0e: [mem 0xfed20000-0xfed8ffff] [ 0.716704] pnp 00:0e: [mem 0xfee00000-0xfee00fff] [ 0.716705] pnp 00:0e: [mem 0xffb00000-0xffb7ffff] [ 0.716707] pnp 00:0e: [mem 0xfff00000-0xffffffff] [ 0.716708] pnp 00:0e: [mem 0x000e0000-0x000effff] [ 0.716761] system 00:0e: [mem 0x000cb400-0x000cbfff] has been reserved [ 0.716765] system 00:0e: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.716769] system 00:0e: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.716772] system 00:0e: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.716775] system 00:0e: [mem 0xcf5b0000-0xcf5fffff] could not be reserved [ 0.716779] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.716782] system 00:0e: [mem 0x00100000-0xcf5affff] could not be reserved [ 0.716786] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.716789] system 00:0e: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.716792] system 00:0e: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.716796] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.716799] system 00:0e: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.716802] system 00:0e: [mem 0xfff00000-0xffffffff] has been reserved [ 0.716806] system 00:0e: [mem 0x000e0000-0x000effff] has been reserved [ 0.716810] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.716824] pnp 00:0f: [mem 0xffb80000-0xffbfffff] [ 0.716856] pnp 00:0f: Plug and Play ACPI device, IDs INT0800 (active) [ 0.716861] pnp: PnP ACPI: found 16 devices [ 0.716864] ACPI: ACPI bus type pnp unregistered [ 0.719777] Switched to NOHz mode on CPU #0 [ 0.719878] Switched to NOHz mode on CPU #2 [ 0.719900] Switched to NOHz mode on CPU #1 [ 0.719902] Switched to NOHz mode on CPU #3 [ 0.722719] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf3200000-0xf33fffff pref] [ 0.722727] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf3400000-0xf35fffff 64bit pref] [ 0.722732] pci 0000:01:00.0: BAR 6: assigned [mem 0xf3200000-0xf327ffff pref] [ 0.722736] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.722739] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff] [ 0.722744] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.722749] pci 0000:00:1c.0: bridge window [mem 0xf3200000-0xf33fffff pref] [ 0.722755] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.722759] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.722764] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf2ffffff] [ 0.722768] pci 0000:00:1c.1: bridge window [mem 0xf3400000-0xf35fffff 64bit pref] [ 0.722775] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.722778] pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff] [ 0.722783] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.722787] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.722800] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.722805] pci 0000:00:1c.0: setting latency timer to 64 [ 0.722811] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.722815] pci 0000:00:1c.1: setting latency timer to 64 [ 0.722820] pci 0000:00:1e.0: setting latency timer to 64 [ 0.722823] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.722825] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff] [ 0.722827] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.722828] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf1ffffff] [ 0.722830] pci_bus 0000:01: resource 2 [mem 0xf3200000-0xf33fffff pref] [ 0.722832] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.722833] pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf2ffffff] [ 0.722835] pci_bus 0000:02: resource 2 [mem 0xf3400000-0xf35fffff 64bit pref] [ 0.722837] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.722838] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.722840] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff] [ 0.722910] NET: Registered protocol family 2 [ 0.723074] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.723937] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.726913] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.727334] TCP: Hash tables configured (established 524288 bind 65536) [ 0.727337] TCP reno registered [ 0.727345] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.727380] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.727639] NET: Registered protocol family 1 [ 0.727661] pci 0000:00:02.0: Boot video device [ 0.727809] PCI: CLS 32 bytes, default 64 [ 0.727853] Trying to unpack rootfs image as initramfs... [ 0.808403] Freeing initrd memory: 5580k freed [ 0.809723] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.809729] Placing 64MB software IO TLB between ffff8800cb200000 - ffff8800cf200000 [ 0.809733] software IO TLB at phys 0xcb200000 - 0xcf200000 [ 0.810219] audit: initializing netlink socket (disabled) [ 0.810234] type=2000 audit(1301350646.810:1): initialized [ 0.819361] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.821195] VFS: Disk quotas dquot_6.5.2 [ 0.821344] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.821557] msgmni has been set to 7776 [ 0.821782] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.821831] io scheduler noop registered [ 0.821834] io scheduler deadline registered [ 0.821859] io scheduler cfq registered (default) [ 0.821935] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.821969] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.822015] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.822042] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.822408] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90011100000, using 1875k, total 8128k [ 0.822413] vesafb: mode is 800x600x16, linelength=1600, pages=7 [ 0.822416] vesafb: scrolling: redraw [ 0.822418] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.828340] Console: switching to colour frame buffer device 100x37 [ 0.833830] fb0: VESA VGA frame buffer device [ 0.833919] intel_idle: MWAIT substates: 0x20 [ 0.833921] intel_idle: does not run on family 6 model 23 [ 0.833931] ERST: Table is not found! [ 0.834036] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.854646] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.030466] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.510606] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.670504] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.810011] Refined TSC clocksource calibration: 2826.249 MHz. [ 1.812611] Switching to clocksource tsc [ 1.815383] Linux agpgart interface v0.103 [ 1.817973] agpgart-intel 0000:00:00.0: Intel Q35 Chipset [ 1.820629] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.824594] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.827193] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.830518] brd: module loaded [ 1.833030] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.835531] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.840686] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.843246] mousedev: PS/2 mouse device common for all mice [ 1.845888] rtc_cmos 00:04: RTC can wake from S4 [ 1.900056] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.902549] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.905046] cpuidle: using governor ladder [ 1.907548] cpuidle: using governor menu [ 1.910211] TCP cubic registered [ 1.912622] Registering the dns_resolver key type [ 1.915077] PM: Checking hibernation image partition UUID=de4db2a3-e111-4a90-aa6f-aaa48612213b [ 1.959486] PM: Hibernation image not present or could not be loaded. [ 1.959499] registered taskstats version 1 [ 1.962234] Magic number: 3:141:301 [ 1.964552] tty tty30: hash matches [ 1.966893] rtc_cmos 00:04: setting system clock to 2011-03-28 22:17:28 UTC (1301350648) [ 1.969292] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 1.972810] Freeing unused kernel memory: 748k freed [ 1.990384] nash-hotplug (46): /proc/46/oom_adj is deprecated, please use /proc/46/oom_score_adj instead. [ 2.613145] SCSI subsystem initialized [ 2.632068] libata version 3.00 loaded. [ 2.633793] pata_jmicron 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.633820] pata_jmicron 0000:02:00.0: setting latency timer to 64 [ 2.634093] scsi0 : pata_jmicron [ 2.634182] scsi1 : pata_jmicron [ 2.634558] ata1: PATA max UDMA/100 cmd 0xd000 ctl 0xd100 bmdma 0xd400 irq 17 [ 2.634560] ata2: PATA max UDMA/100 cmd 0xd200 ctl 0xd300 bmdma 0xd408 irq 17 [ 2.810649] ata1.00: HPA detected: current 488395055, native 488397168 [ 2.810654] ata1.00: ATA-7: ST3250823A, 3.02, max UDMA/100 [ 2.810657] ata1.00: 488395055 sectors, multi 16: LBA48 [ 2.850634] ata1.00: configured for UDMA/100 [ 2.850742] scsi 0:0:0:0: Direct-Access ATA ST3250823A 3.02 PQ: 0 ANSI: 5 [ 2.850918] sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250 GB/232 GiB) [ 2.850975] sd 0:0:0:0: [sda] Write Protect is off [ 2.850977] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.850996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.951789] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 2.952156] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.018889] Uniform Multi-Platform E-IDE driver [ 3.021956] ide-gd driver 1.18 [ 3.030988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 3.033296] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 3.042489] ahci 0000:00:1f.2: version 3.0 [ 3.042505] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.042537] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 3.042563] ahci: SSS flag set, parallel bus scan disabled [ 3.042590] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 3.042593] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems [ 3.042596] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.140519] scsi2 : ahci [ 3.140604] scsi3 : ahci [ 3.140683] scsi4 : ahci [ 3.140762] scsi5 : ahci [ 3.140840] scsi6 : ahci [ 3.140918] scsi7 : ahci [ 3.141034] ata3: SATA max UDMA/133 abar m2048@0xf31a7000 port 0xf31a7100 irq 42 [ 3.141037] ata4: SATA max UDMA/133 abar m2048@0xf31a7000 port 0xf31a7180 irq 42 [ 3.141039] ata5: SATA max UDMA/133 abar m2048@0xf31a7000 port 0xf31a7200 irq 42 [ 3.141041] ata6: SATA max UDMA/133 abar m2048@0xf31a7000 port 0xf31a7280 irq 42 [ 3.141043] ata7: SATA max UDMA/133 abar m2048@0xf31a7000 port 0xf31a7300 irq 42 [ 3.141045] ata8: SATA max UDMA/133 abar m2048@0xf31a7000 port 0xf31a7380 irq 42 [ 3.490012] ata3: SATA link down (SStatus 0 SControl 300) [ 3.840012] ata4: SATA link down (SStatus 0 SControl 300) [ 4.190012] ata5: SATA link down (SStatus 0 SControl 300) [ 4.540011] ata6: SATA link down (SStatus 0 SControl 300) [ 4.890014] ata7: SATA link down (SStatus 0 SControl 300) [ 5.240012] ata8: SATA link down (SStatus 0 SControl 300) [ 5.840484] EXT3-fs: barriers not enabled [ 5.848800] kjournald starting. Commit interval 5 seconds [ 5.848821] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 5.933905] Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist. [ 6.782622] usbcore: registered new interface driver usbfs [ 6.782646] usbcore: registered new interface driver hub [ 6.782693] usbcore: registered new device driver usb [ 7.421552] udev: starting version 153 [ 7.916999] Floppy drive(s): fd0 is 1.44M [ 7.933624] FDC 0 is a post-1991 82077 [ 8.040863] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.151054] iTCO_vendor_support: vendor-support=0 [ 8.319842] IT8718 SuperIO detected. [ 8.320010] parport_pc 00:0a: reported by Plug and Play ACPI [ 8.320051] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.329430] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 8.329510] iTCO_wdt: Found a ICH9DO TCO device (Version=2, TCOBASE=0x0460) [ 8.329567] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 8.429013] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 8.429018] ACPI: Power Button [PWRB] [ 8.429085] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 8.429087] ACPI: Power Button [PWRF] [ 8.446694] ACPI: acpi_idle registered with cpuidle [ 8.475057] ppdev: user-space parallel port driver [ 8.496231] uhci_hcd: USB Universal Host Controller Interface driver [ 8.496354] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.496365] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.496368] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.496396] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 8.511983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.511986] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 8.540592] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 [ 8.540629] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.540631] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.540633] usb usb1: Product: UHCI Host Controller [ 8.540634] usb usb1: Manufacturer: Linux 2.6.38 uhci_hcd [ 8.540636] usb usb1: SerialNumber: 0000:00:1a.0 [ 8.540738] hub 1-0:1.0: USB hub found [ 8.540742] hub 1-0:1.0: 2 ports detected [ 8.540814] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.540821] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8.540824] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.540830] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 8.542006] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 [ 8.542008] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 8.590053] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100 [ 8.590090] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.590093] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.590096] usb usb2: Product: UHCI Host Controller [ 8.590098] usb usb2: Manufacturer: Linux 2.6.38 uhci_hcd [ 8.590100] usb usb2: SerialNumber: 0000:00:1a.1 [ 8.590207] hub 2-0:1.0: USB hub found [ 8.590211] hub 2-0:1.0: 2 ports detected [ 8.590276] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.590282] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 8.590285] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 8.590291] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 8.630054] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e200 [ 8.630089] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.630091] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.630093] usb usb3: Product: UHCI Host Controller [ 8.630094] usb usb3: Manufacturer: Linux 2.6.38 uhci_hcd [ 8.630096] usb usb3: SerialNumber: 0000:00:1a.2 [ 8.630192] hub 3-0:1.0: USB hub found [ 8.630195] hub 3-0:1.0: 2 ports detected [ 8.630261] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.630267] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.630270] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.630276] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 8.690052] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e500 [ 8.690087] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.690090] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.690093] usb usb4: Product: UHCI Host Controller [ 8.690095] usb usb4: Manufacturer: Linux 2.6.38 uhci_hcd [ 8.690097] usb usb4: SerialNumber: 0000:00:1d.0 [ 8.690210] hub 4-0:1.0: USB hub found [ 8.690214] hub 4-0:1.0: 2 ports detected [ 8.690275] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.690281] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.690283] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.690289] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 8.730055] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e600 [ 8.730087] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.730090] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.730093] usb usb5: Product: UHCI Host Controller [ 8.730095] usb usb5: Manufacturer: Linux 2.6.38 uhci_hcd [ 8.730097] usb usb5: SerialNumber: 0000:00:1d.1 [ 8.730187] hub 5-0:1.0: USB hub found [ 8.730190] hub 5-0:1.0: 2 ports detected [ 8.730243] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.730250] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8.730252] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.730258] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 8.770031] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e700 [ 8.770065] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.770068] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.770070] usb usb6: Product: UHCI Host Controller [ 8.770072] usb usb6: Manufacturer: Linux 2.6.38 uhci_hcd [ 8.770074] usb usb6: SerialNumber: 0000:00:1d.2 [ 8.770172] hub 6-0:1.0: USB hub found [ 8.770175] hub 6-0:1.0: 2 ports detected [ 8.770450] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.770477] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8.770480] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 8.770492] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 [ 8.813945] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 8.814096] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf31a4000 [ 8.830016] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 8.830043] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.830046] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.830048] usb usb7: Product: EHCI Host Controller [ 8.830050] usb usb7: Manufacturer: Linux 2.6.38 ehci_hcd [ 8.830052] usb usb7: SerialNumber: 0000:00:1a.7 [ 8.830181] hub 7-0:1.0: USB hub found [ 8.830185] hub 7-0:1.0: 6 ports detected [ 8.830270] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.830299] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8.830302] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.830309] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 8.893903] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 8.893911] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf31a6000 [ 8.910009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 8.910028] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.910031] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.910033] usb usb8: Product: EHCI Host Controller [ 8.910035] usb usb8: Manufacturer: Linux 2.6.38 ehci_hcd [ 8.910037] usb usb8: SerialNumber: 0000:00:1d.7 [ 8.910152] hub 8-0:1.0: USB hub found [ 8.910155] hub 8-0:1.0: 6 ports detected [ 8.910261] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 8.910272] e1000e 0000:00:19.0: setting latency timer to 64 [ 8.910375] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 9.501996] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:d0:25:c6:88 [ 9.501999] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 9.502017] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: FFFFFF-0FF [ 9.502042] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 10.586894] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.586934] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 10.586954] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.708273] SKU: Nid=0x0 sku_cfg=0x0000e601 [ 10.708275] SKU: port_connectivity=0x0 [ 10.708276] SKU: enable_pcbeep=0x1 [ 10.708277] SKU: check_sum=0x00000000 [ 10.708278] SKU: customization=0x00000000 [ 10.708279] SKU: external_amp=0x0 [ 10.708280] SKU: platform_type=0x0 [ 10.708281] SKU: swap=0x0 [ 10.708282] SKU: override=0x1 [ 11.140226] device-mapper: uevent: version 1.0.3 [ 11.140308] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 11.980275] EXT3-fs (sda1): using internal journal [ 14.080619] EXT3-fs: barriers not enabled [ 14.080868] kjournald starting. Commit interval 5 seconds [ 14.081117] EXT3-fs (sda7): using internal journal [ 14.081122] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 14.118149] EXT3-fs: barriers not enabled [ 14.118374] kjournald starting. Commit interval 5 seconds [ 14.118675] EXT3-fs (sda6): using internal journal [ 14.118679] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 14.147343] EXT3-fs: barriers not enabled [ 14.147558] kjournald starting. Commit interval 5 seconds [ 14.147781] EXT3-fs (sda5): using internal journal [ 14.147785] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 14.235297] EXT3-fs: barriers not enabled [ 14.235544] kjournald starting. Commit interval 5 seconds [ 14.235745] EXT3-fs (sda9): using internal journal [ 14.235748] EXT3-fs (sda9): mounted filesystem with ordered data mode [ 14.374345] loop: module loaded [ 15.304193] Adding 8233276k swap on /dev/sda10. Priority:-1 extents:1 across:8233276k [ 17.442089] it87: Found IT8718F chip at 0x290, revision 5 [ 17.442106] it87: Beeping is supported [ 20.100164] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 20.160043] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 21.900094] [drm] Initialized drm 1.1.0 20060810 [ 22.130901] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 22.130905] i915 0000:00:02.0: setting latency timer to 64 [ 22.175079] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 22.175082] [drm] MTRR allocation failed. Graphics performance may suffer. [ 22.175323] i915 0000:00:02.0: irq 45 for MSI/MSI-X [ 22.175327] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 22.175328] [drm] Driver supports precise vblank timestamp query. [ 22.178641] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 22.178959] [drm] initialized overlay support [ 22.200012] No connectors reported connected with modes [ 22.200015] [drm] Cannot find any crtc or sizes - going 1024x768 [ 22.202912] checking generic (e0000000 7f0000) vs hw (e0000000 10000000) [ 22.202914] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver [ 22.202948] Console: switching to colour dummy device 80x25 [ 22.203240] Console: switching to colour frame buffer device 128x48 [ 22.203245] fb0: inteldrmfb frame buffer device [ 22.203246] drm: registered panic notifier [ 22.203392] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 22.601020] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.700120] e1000e: eth0 NIC Link is Down [ 25.760859] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 28.374188] NET: Registered protocol family 17 [ 31.442066] RPC: Registered udp transport module. [ 31.442068] RPC: Registered tcp transport module. [ 31.442069] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 31.571721] FS-Cache: Loaded [ 31.864454] FS-Cache: Netfs 'nfs' registered for caching [ 32.179580] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 32.548413] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 32.568820] NFSD: starting 90-second grace period [ 32.947902] ip_tables: (C) 2000-2006 Netfilter Core Team [ 33.791392] Netfilter messages via NETLINK v0.30. [ 33.938068] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 34.729939] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 34.729941] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 34.897562] ctnetlink v0.93: registering with nfnetlink. [ 35.383834] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 36.198372] xt_time: kernel timezone is +0200 [ 37.553588] u32 classifier [ 37.553591] Actions configured # modprobe sata_sil24 [ 159.288856] sata_sil24 0000:01:00.0: version 1.1 [ 159.288869] sata_sil24 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 159.288930] sata_sil24 0000:01:00.0: setting latency timer to 64 [ 159.289715] scsi8 : sata_sil24 [ 159.289914] scsi9 : sata_sil24 [ 159.289957] ata9: SATA max UDMA/100 host m128@0xf1004000 port 0xf1000000 irq 16 [ 159.289960] ata10: SATA max UDMA/100 host m128@0xf1004000 port 0xf1002000 irq 16 [ 161.510025] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 161.510293] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 161.511915] ata9.00: hard resetting link [ 161.860274] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 161.860301] ata9.01: hard resetting link [ 162.210274] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 162.210303] ata9.02: hard resetting link [ 162.560273] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 162.560301] ata9.03: hard resetting link [ 162.910274] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 162.910301] ata9.04: hard resetting link [ 163.260274] ata9.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 163.260301] ata9.05: hard resetting link [ 163.610274] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 163.611792] ata9.00: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 163.611795] ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 163.613689] ata9.00: configured for UDMA/100 [ 163.615286] ata9.01: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 163.615289] ata9.01: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 163.617278] ata9.01: configured for UDMA/100 [ 163.618880] ata9.02: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 163.618883] ata9.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 163.620849] ata9.02: configured for UDMA/100 [ 163.622347] ata9.03: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 163.622350] ata9.03: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 163.624243] ata9.03: configured for UDMA/100 [ 163.625735] ata9.04: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 163.625737] ata9.04: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 163.627631] ata9.04: configured for UDMA/100 [ 163.627682] ata9: EH complete [ 163.627789] scsi 8:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 163.627926] sd 8:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 163.627937] sd 8:0:0:0: Attached scsi generic sg1 type 0 [ 163.627976] sd 8:0:0:0: [sdb] Write Protect is off [ 163.627979] sd 8:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 163.628001] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 163.628021] scsi 8:1:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 163.628143] sd 8:1:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 163.628149] sd 8:1:0:0: Attached scsi generic sg2 type 0 [ 163.628192] sd 8:1:0:0: [sdc] Write Protect is off [ 163.628195] sd 8:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 163.628213] sd 8:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 163.628221] scsi 8:2:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 163.628323] sd 8:2:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 163.628336] sd 8:2:0:0: Attached scsi generic sg3 type 0 [ 163.628362] sd 8:2:0:0: [sdd] Write Protect is off [ 163.628364] sd 8:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 163.628381] sd 8:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 163.628410] scsi 8:3:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 163.628500] sd 8:3:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 163.628506] sd 8:3:0:0: Attached scsi generic sg4 type 0 [ 163.628548] sd 8:3:0:0: [sde] Write Protect is off [ 163.628550] sd 8:3:0:0: [sde] Mode Sense: 00 3a 00 00 [ 163.628572] sd 8:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 163.628582] scsi 8:4:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 163.628699] sd 8:4:0:0: Attached scsi generic sg5 type 0 [ 163.628808] sd 8:4:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 163.628848] sd 8:4:0:0: [sdf] Write Protect is off [ 163.628850] sd 8:4:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 163.628867] sd 8:4:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 163.641133] sdd: unknown partition table [ 163.641303] sd 8:2:0:0: [sdd] Attached SCSI disk [ 163.644749] sdc: unknown partition table [ 163.647561] sde: unknown partition table [ 163.649403] sdb: unknown partition table [ 163.652587] sdf: unknown partition table [ 163.658046] sd 8:3:0:0: [sde] Attached SCSI disk [ 163.660731] sd 8:1:0:0: [sdc] Attached SCSI disk [ 163.660745] sd 8:0:0:0: [sdb] Attached SCSI disk [ 163.666106] sd 8:4:0:0: [sdf] Attached SCSI disk [ 163.757033] md: bind [ 163.759258] md: bind [ 163.759930] md: bind [ 163.765054] md: bind [ 163.775735] md: bind [ 163.779479] md: kicking non-fresh sdf from array! [ 163.779484] md: unbind [ 163.820147] md: export_rdev(sdf) [ 163.861405] async_tx: api initialized (async) [ 165.710025] ata10: SATA link down (SStatus 0 SControl 0) [ 165.970021] raid6: int64x1 2213 MB/s [ 166.140012] raid6: int64x2 2896 MB/s [ 166.310029] raid6: int64x4 2166 MB/s [ 166.480028] raid6: int64x8 1933 MB/s [ 166.650018] raid6: sse2x1 4491 MB/s [ 166.820013] raid6: sse2x2 5628 MB/s [ 166.990011] raid6: sse2x4 8304 MB/s [ 166.990016] raid6: using algorithm sse2x4 (8304 MB/s) [ 167.024604] xor: automatically using best checksumming function: generic_sse [ 167.070007] generic_sse: 10394.000 MB/sec [ 167.070008] xor: using function: generic_sse (10394.000 MB/sec) [ 167.131589] md: raid6 personality registered for level 6 [ 167.131596] md: raid5 personality registered for level 5 [ 167.131597] md: raid4 personality registered for level 4 [ 167.131916] bio: create slab at 1 [ 167.131929] md/raid:md0: device sdb operational as raid disk 0 [ 167.131930] md/raid:md0: device sde operational as raid disk 2 [ 167.131932] md/raid:md0: device sdc operational as raid disk 1 [ 167.132226] md/raid:md0: allocated 4282kB [ 167.132281] md/raid:md0: raid level 6 active with 3 out of 4 devices, algorithm 2 [ 167.132568] RAID conf printout: [ 167.132569] --- level:6 rd:4 wd:3 [ 167.132570] disk 0, o:1, dev:sdb [ 167.132572] disk 1, o:1, dev:sdc [ 167.132573] disk 2, o:1, dev:sde [ 167.132574] disk 3, o:1, dev:sdd [ 167.159041] created bitmap (8 pages) for device md0 [ 167.159486] md0: bitmap initialized from disk: read 1/1 pages, set 0 bits [ 167.210949] md0: detected capacity change from 0 to 2000409460736 [ 167.210976] RAID conf printout: [ 167.210980] --- level:6 rd:4 wd:3 [ 167.210983] disk 0, o:1, dev:sdb [ 167.210985] disk 1, o:1, dev:sdc [ 167.210987] disk 2, o:1, dev:sde [ 167.210989] disk 3, o:1, dev:sdd [ 167.210991] RAID conf printout: [ 167.210992] --- level:6 rd:4 wd:3 [ 167.210994] disk 0, o:1, dev:sdb [ 167.210996] disk 1, o:1, dev:sdc [ 167.210997] disk 2, o:1, dev:sde [ 167.210999] disk 3, o:1, dev:sdd [ 167.211153] md: recovery of RAID array md0 [ 167.211155] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 167.211156] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 167.211160] md: using 128k window, over a total of 976762432 blocks. [ 167.211161] md: resuming recovery of md0 from checkpoint. [ 167.327317] md0: p1 p2 p3 p4 # mdadm --manage /dev/md0 --add /dev/sdf [ 195.896376] md: bind [ 214.010063] ata9.00: failed to read SCR 1 (Emask=0x40) [ 214.010067] ata9.01: failed to read SCR 1 (Emask=0x40) [ 214.010070] ata9.02: failed to read SCR 1 (Emask=0x40) [ 214.010073] ata9.03: failed to read SCR 1 (Emask=0x40) [ 214.010075] ata9.04: failed to read SCR 1 (Emask=0x40) [ 214.010077] ata9.05: failed to read SCR 1 (Emask=0x40) [ 214.010082] ata9.15: exception Emask 0x4 SAct 0x0 SErr 0x0 action 0x6 frozen [ 214.010085] ata9.15: irq_stat 0x08040800, SDB notify [ 214.010088] ata9.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 214.010091] ata9.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 214.010095] ata9.02: exception Emask 0x100 SAct 0x1d SErr 0x0 action 0x6 frozen [ 214.010098] ata9.02: failed command: WRITE FPDMA QUEUED [ 214.010104] ata9.02: cmd 61/00:00:88:1b:0d/01:00:08:00:00/40 tag 0 ncq 131072 out [ 214.010105] res 61/00:00:88:1b:0d/00:00:08:00:00/40 Emask 0x5 (timeout) [ 214.010108] ata9.02: status: { DRDY DF ERR } [ 214.010110] ata9.02: failed command: WRITE FPDMA QUEUED [ 214.010115] ata9.02: cmd 61/00:10:88:1a:0d/01:00:08:00:00/40 tag 2 ncq 131072 out [ 214.010117] res 61/00:10:88:1a:0d/00:00:08:00:00/40 Emask 0x5 (timeout) [ 214.010119] ata9.02: status: { DRDY DF ERR } [ 214.010121] ata9.02: failed command: WRITE FPDMA QUEUED [ 214.010127] ata9.02: cmd 61/00:18:88:18:0d/01:00:08:00:00/40 tag 3 ncq 131072 out [ 214.010128] res 68/16:01:01:00:00/00:00:80:31:68/00 Emask 0x6 (timeout) [ 214.010135] ata9.02: status: { DRDY DF DRQ } [ 214.010137] ata9.02: error: { IDNF ABRT } [ 214.010138] ata9.02: failed command: WRITE FPDMA QUEUED [ 214.010142] ata9.02: cmd 61/00:20:88:19:0d/01:00:08:00:00/40 tag 4 ncq 131072 out [ 214.010143] res 61/00:20:88:19:0d/00:00:08:00:00/40 Emask 0x5 (timeout) [ 214.010145] ata9.02: status: { DRDY DF ERR } [ 214.010151] ata9.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 214.010153] ata9.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 214.010156] ata9.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 214.010158] ata9.15: hard resetting link [ 216.230026] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 216.230284] ata9.00: hard resetting link [ 216.580273] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 216.580300] ata9.01: hard resetting link [ 216.930272] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 216.930298] ata9.02: hard resetting link [ 217.280272] ata9.02: SATA link down (SStatus 0 SControl 320) [ 217.280325] ata9.03: hard resetting link [ 217.630274] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 217.630300] ata9.04: hard resetting link [ 217.980273] ata9.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 217.980298] ata9.05: hard resetting link [ 218.330272] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 218.333730] ata9.00: configured for UDMA/100 [ 218.337080] ata9.01: configured for UDMA/100 [ 218.340530] ata9.03: configured for UDMA/100 [ 218.370145] ata9.04: configured for UDMA/100 [ 222.280011] ata9.02: hard resetting link [ 222.630274] ata9.02: SATA link down (SStatus 0 SControl 320) [ 222.630372] ata9.02: limiting SATA link speed to 1.5 Gbps [ 227.630008] ata9.02: hard resetting link [ 227.980261] ata9.02: SATA link down (SStatus 0 SControl 310) [ 227.980335] ata9.02: disabled [ 227.980445] sd 8:2:0:0: [sdd] Unhandled sense code [ 227.980447] sd 8:2:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 227.980450] sd 8:2:0:0: [sdd] Sense Key : Hardware Error [current] [descriptor] [ 227.980453] Descriptor sense data with sense descriptors (in hex): [ 227.980455] 72 04 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 227.980460] 08 0d 1b 88 [ 227.980462] sd 8:2:0:0: [sdd] Add. Sense: No additional sense information [ 227.980465] sd 8:2:0:0: [sdd] CDB: Write(10): 2a 00 08 0d 1b 88 00 01 00 00 [ 227.980471] end_request: I/O error, dev sdd, sector 135076744 [ 227.980474] md/raid:md0: Disk failure on sdd, disabling device. [ 227.980475] md/raid:md0: Operation continuing on 3 devices. [ 227.980926] sd 8:2:0:0: rejecting I/O to offline device [ 227.980930] sd 8:2:0:0: rejecting I/O to offline device [ 227.980966] sd 8:2:0:0: [sdd] Unhandled sense code [ 227.980968] sd 8:2:0:0: [sdd] [ 227.980971] sd 8:2:0:0: [sdd] Unhandled error code [ 227.980973] sd 8:2:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 227.980977] sd 8:2:0:0: [sdd] CDB: Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 227.980979] sd 8:2:0:0: [sdd] Sense Key : Hardware Error [current] [descriptor] [ 227.980983] Descriptor sense data with sense descriptors (in hex): [ 227.980985] 72 04 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 227.980996] 08 0d 1a 88 [ 227.981000] sd 8:2:0:0: [sdd] Add. Sense: No additional sense informationWrite(10): 2a 00 08 0d 1c 88 00 01 00 00 [ 227.981011] end_request: I/O error, dev sdd, sector 135077000 [ 227.981012] [ 227.981013] sd 8:2:0:0: [sdd] CDB: Write(10): 2a 00 08 0d 1a 88 00 01 00 00 [ 227.981018] end_request: I/O error, dev sdd, sector 135076488 [ 227.981052] sd 8:2:0:0: [sdd] Unhandled sense code [ 227.981053] sd 8:2:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 227.981055] sd 8:2:0:0: [sdd] Sense Key : Hardware Error [current] [descriptor] [ 227.981063] Descriptor sense data with sense descriptors (in hex): [ 227.981064] 72 04 00 00 00 00 00 0c 00 0a 80 00 00 00 68 31 [ 227.981069] 80 00 00 01 [ 227.981072] sd 8:2:0:0: [sdd] Add. Sense: No additional sense information [ 227.981074] sd 8:2:0:0: [sdd] CDB: Write(10): 2a 00 08 0d 18 88 00 01 00 00 [ 227.981078] end_request: I/O error, dev sdd, sector 135075976 [ 227.981095] sd 8:2:0:0: [sdd] Unhandled sense code [ 227.981097] sd 8:2:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 227.981099] sd 8:2:0:0: [sdd] Sense Key : Hardware Error [current] [descriptor] [ 227.981101] Descriptor sense data with sense descriptors (in hex): [ 227.981102] 72 04 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 227.981107] 08 0d 19 88 [ 227.981110] sd 8:2:0:0: [sdd] Add. Sense: No additional sense information [ 227.981112] sd 8:2:0:0: [sdd] CDB: Write(10): 2a 00 08 0d 19 88 00 01 00 00 [ 227.981117] end_request: I/O error, dev sdd, sector 135076232 [ 227.981130] ata9: EH complete [ 228.026224] ata9.02: detaching (SCSI 8:2:0:0) [ 228.110106] sd 8:2:0:0: [sdd] Synchronizing SCSI cache [ 228.110146] sd 8:2:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 228.110149] sd 8:2:0:0: [sdd] Stopping disk [ 228.110155] sd 8:2:0:0: [sdd] START_STOP FAILED [ 228.110157] sd 8:2:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 228.120634] md: md0: recovery done. [ 228.260062] RAID conf printout: [ 228.260065] --- level:6 rd:4 wd:3 [ 228.260067] disk 0, o:1, dev:sdb [ 228.260069] disk 1, o:1, dev:sdc [ 228.260071] disk 2, o:1, dev:sde [ 228.260073] disk 3, o:0, dev:sdd [ 228.320007] RAID conf printout: [ 228.320009] --- level:6 rd:4 wd:3 [ 228.320012] disk 0, o:1, dev:sdb [ 228.320013] disk 1, o:1, dev:sdc [ 228.320015] disk 2, o:1, dev:sde [ 228.320019] RAID conf printout: [ 228.320020] --- level:6 rd:4 wd:3 [ 228.320022] disk 0, o:1, dev:sdb [ 228.320024] disk 1, o:1, dev:sdc [ 228.320026] disk 2, o:1, dev:sde [ 228.320027] disk 3, o:1, dev:sdf [ 228.320064] md: recovery of RAID array md0 [ 228.320067] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 228.320070] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 228.320074] md: using 128k window, over a total of 976762432 blocks. [ 309.123292] ata9: PMP SError.N set for some ports, repeating recovery [ 309.123348] ata9.02: hard resetting link [ 309.870272] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 309.970009] ata9.02: failed to IDENTIFY (I/O error, err_mask=0x11) [ 309.970014] ata9.15: hard resetting link [ 309.970016] ata9: controller in dubious state, performing PORT_RST [ 312.230026] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 312.230276] ata9.00: hard resetting link [ 312.580270] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 312.580296] ata9.01: hard resetting link [ 312.930272] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 314.870014] ata9.02: hard resetting link [ 315.220272] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 315.220300] ata9.03: hard resetting link [ 315.570273] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 315.570300] ata9.04: hard resetting link [ 315.920275] ata9.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 315.920301] ata9.05: hard resetting link [ 316.270271] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 316.273724] ata9.00: configured for UDMA/100 [ 316.277302] ata9.01: configured for UDMA/100 [ 316.370008] ata9.02: failed to IDENTIFY (I/O error, err_mask=0x11) [ 316.370012] ata9.02: failed to recover link after 3 tries, disabling [ 316.370015] ata9.15: hard resetting link [ 316.370017] ata9: controller in dubious state, performing PORT_RST [ 318.630028] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 318.980125] ata9.00: hard resetting link [ 319.330274] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 319.330302] ata9.01: hard resetting link [ 319.680272] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 320.570083] ata9.03: hard resetting link [ 320.920274] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 320.920304] ata9.04: hard resetting link [ 321.270273] ata9.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 321.270300] ata9.05: hard resetting link [ 321.620287] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 321.623744] ata9.00: configured for UDMA/100 [ 321.627300] ata9.01: configured for UDMA/100 [ 321.630732] ata9.03: configured for UDMA/100 [ 321.634144] ata9.04: configured for UDMA/100 [ 321.634196] ata9: EH complete # echo "- - -" >/sys/class/scsi_host/host9/scan [ 557.640296] ata10: hard resetting link [ 559.730035] ata10: SATA link down (SStatus 0 SControl 0) [ 559.730044] ata10: EH complete # mdadm --manage /dev/md0 --stop [ 720.870037] md: md_do_sync() got signal ... exiting [ 720.958165] md0: detected capacity change from 2000409460736 to 0 [ 720.958171] md: md0 stopped. [ 720.958176] md: unbind [ 721.000010] md: export_rdev(sdf) [ 721.000021] md: unbind [ 721.080008] md: export_rdev(sdd) [ 721.080067] md: unbind [ 721.150010] md: export_rdev(sdb) [ 721.150016] md: unbind [ 721.230007] md: export_rdev(sde) [ 721.230013] md: unbind [ 721.350007] md: export_rdev(sdc) # rmmod sata_sil24 [ 774.311010] ata9.00: disabled [ 774.311039] ata9.01: disabled [ 774.311093] ata9.03: disabled [ 774.311120] ata9.04: disabled [ 774.311145] ata9.15: disabled [ 774.380113] sd 8:0:0:0: [sdb] Synchronizing SCSI cache [ 774.380165] sd 8:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 774.380168] sd 8:0:0:0: [sdb] Stopping disk [ 774.380175] sd 8:0:0:0: [sdb] START_STOP FAILED [ 774.380177] sd 8:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 774.450086] sd 8:1:0:0: [sdc] Synchronizing SCSI cache [ 774.450119] sd 8:1:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 774.450123] sd 8:1:0:0: [sdc] Stopping disk [ 774.450138] sd 8:1:0:0: [sdc] START_STOP FAILED [ 774.450139] sd 8:1:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 774.520085] sd 8:3:0:0: [sde] Synchronizing SCSI cache [ 774.520117] sd 8:3:0:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 774.520121] sd 8:3:0:0: [sde] Stopping disk [ 774.520135] sd 8:3:0:0: [sde] START_STOP FAILED [ 774.520137] sd 8:3:0:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 774.600088] sd 8:4:0:0: [sdf] Synchronizing SCSI cache [ 774.600119] sd 8:4:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 774.600123] sd 8:4:0:0: [sdf] Stopping disk [ 774.600137] sd 8:4:0:0: [sdf] START_STOP FAILED [ 774.600139] sd 8:4:0:0: [sdf] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 774.600382] sata_sil24 0000:01:00.0: PCI INT A disabled # modprobe sata_sil24 [ 811.494960] sata_sil24 0000:01:00.0: version 1.1 [ 811.494974] sata_sil24 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 811.495031] sata_sil24 0000:01:00.0: setting latency timer to 64 [ 811.495780] scsi10 : sata_sil24 [ 811.495862] scsi11 : sata_sil24 [ 811.495909] ata11: SATA max UDMA/100 host m128@0xf1004000 port 0xf1000000 irq 16 [ 811.495913] ata12: SATA max UDMA/100 host m128@0xf1004000 port 0xf1002000 irq 16 [ 813.710025] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 813.710285] ata11.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 [ 813.712142] ata11.00: hard resetting link [ 814.060275] ata11.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 814.060303] ata11.01: hard resetting link [ 814.410274] ata11.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 814.410303] ata11.02: hard resetting link [ 814.760273] ata11.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 814.760301] ata11.03: hard resetting link [ 815.110272] ata11.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 815.110298] ata11.04: hard resetting link [ 815.460274] ata11.04: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 815.460301] ata11.05: hard resetting link [ 815.810274] ata11.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 815.811806] ata11.00: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 815.811809] ata11.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 815.813703] ata11.00: configured for UDMA/100 [ 815.815267] ata11.01: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 815.815270] ata11.01: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 815.817248] ata11.01: configured for UDMA/100 [ 815.818804] ata11.02: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 815.818808] ata11.02: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 815.820791] ata11.02: configured for UDMA/100 [ 815.822299] ata11.03: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 815.822302] ata11.03: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 815.824204] ata11.03: configured for UDMA/100 [ 815.825698] ata11.04: ATA-8: ST31000340AS, SD15, max UDMA/133 [ 815.825701] ata11.04: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 815.827599] ata11.04: configured for UDMA/100 [ 815.827651] ata11: EH complete [ 815.827754] scsi 10:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 815.827894] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 815.827971] scsi 10:1:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 815.828064] sd 10:1:0:0: Attached scsi generic sg2 type 0 [ 815.828131] scsi 10:2:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 815.828232] sd 10:2:0:0: Attached scsi generic sg3 type 0 [ 815.828302] scsi 10:3:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 815.828396] sd 10:3:0:0: Attached scsi generic sg4 type 0 [ 815.828462] scsi 10:4:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 [ 815.828561] sd 10:4:0:0: Attached scsi generic sg5 type 0 [ 815.828627] sd 10:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 815.828667] sd 10:0:0:0: [sdb] Write Protect is off [ 815.828669] sd 10:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 815.828687] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 815.830908] sd 10:1:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 815.830948] sd 10:1:0:0: [sdc] Write Protect is off [ 815.830950] sd 10:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 815.830967] sd 10:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 815.833188] sd 10:2:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 815.833229] sd 10:2:0:0: [sdd] Write Protect is off [ 815.833231] sd 10:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 815.833248] sd 10:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 815.833889] sd 10:3:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 815.833928] sd 10:3:0:0: [sde] Write Protect is off [ 815.833930] sd 10:3:0:0: [sde] Mode Sense: 00 3a 00 00 [ 815.833947] sd 10:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 815.834396] sd 10:4:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 815.834436] sd 10:4:0:0: [sdf] Write Protect is off [ 815.834438] sd 10:4:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 815.834455] sd 10:4:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 815.843165] sdb: unknown partition table [ 815.843323] sd 10:0:0:0: [sdb] Attached SCSI disk [ 815.847554] sdc: unknown partition table [ 815.854490] sde: unknown partition table [ 815.857250] sdd: unknown partition table [ 815.857806] sdf: unknown partition table [ 815.864049] sd 10:2:0:0: [sdd] Attached SCSI disk [ 815.865520] sd 10:1:0:0: [sdc] Attached SCSI disk [ 815.865572] sd 10:3:0:0: [sde] Attached SCSI disk [ 815.865587] sd 10:4:0:0: [sdf] Attached SCSI disk [ 815.950788] md: bind [ 815.962626] md: bind [ 815.965389] md: bind [ 815.969921] md: bind [ 815.975724] md: bind [ 815.980197] md: kicking non-fresh sdd from array! [ 815.980202] md: unbind [ 816.030012] md: export_rdev(sdd) [ 816.031654] md/raid:md0: device sdc operational as raid disk 1 [ 816.031657] md/raid:md0: device sdb operational as raid disk 0 [ 816.031658] md/raid:md0: device sde operational as raid disk 2 [ 816.032008] md/raid:md0: allocated 4282kB [ 816.032056] md/raid:md0: raid level 6 active with 3 out of 4 devices, algorithm 2 [ 816.032338] RAID conf printout: [ 816.032339] --- level:6 rd:4 wd:3 [ 816.032340] disk 0, o:1, dev:sdb [ 816.032341] disk 1, o:1, dev:sdc [ 816.032343] disk 2, o:1, dev:sde [ 816.032344] disk 3, o:1, dev:sdf [ 816.032618] created bitmap (8 pages) for device md0 [ 816.033047] md0: bitmap initialized from disk: read 1/1 pages, set 0 bits [ 816.065448] md0: detected capacity change from 0 to 2000409460736 [ 816.065470] RAID conf printout: [ 816.065473] --- level:6 rd:4 wd:3 [ 816.065476] disk 0, o:1, dev:sdb [ 816.065478] disk 1, o:1, dev:sdc [ 816.065480] disk 2, o:1, dev:sde [ 816.065482] disk 3, o:1, dev:sdf [ 816.065483] RAID conf printout: [ 816.065485] --- level:6 rd:4 wd:3 [ 816.065487] disk 0, o:1, dev:sdb [ 816.065488] disk 1, o:1, dev:sdc [ 816.065490] disk 2, o:1, dev:sde [ 816.065492] disk 3, o:1, dev:sdf [ 816.065615] md: recovery of RAID array md0 [ 816.065617] md: minimum _guaranteed_ speed: 1000 KB/sec/disk. [ 816.065619] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery. [ 816.065622] md: using 128k window, over a total of 976762432 blocks. [ 816.065624] md: resuming recovery of md0 from checkpoint. [ 816.183628] md0: p1 p2 p3 p4 [ 817.920036] ata12: SATA link down (SStatus 0 SControl 0)