Linux version 2.6.7-hh0 (rtp@gaston) (gcc version 3.3.3 (Debian 20040401)) #41 Sun Jul 18 20:15:36 CEST 2004
CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)
CPU: D VIVT write-back cache
CPU: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Machine: IPAQ-H1940
Memory policy: ECC disabled, Data cache writeback
S3C2410: core 270.000 MHz, memory 135.000 MHz, peripheral 67.500 MHz
On node 0 totalpages: 16384
  DMA zone: 16384 pages, LIFO batch:4
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: console=tty0 console=ttySAC2,115200n8 root=/dev/ram init=/sbin/init panic=30
irq: clearing pending status 00004000
irq: clearing pending status 00004000
irq: clearing pending status 00004000
irq: clearing pending status 00004000
irq: clearing subpending status 00000092
irq: clearing subpending status 00000092
irq: clearing subpending status 00000092
irq: clearing subpending status 00000092
PID hash table entries: 512 (order 9: 4096 bytes)
setup_timer tcon=00500109, tcnt dbba, tcfg 00000218,00000010
Console: colour dummy device 80x30
Memory: 64MB = 64MB total
Memory: 61696KB available (1997K code, 460K data, 92K init)
Calibrating delay loop... 134.75 BogoMIPS
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 624K
NET: Registered protocol family 16
S3C2410: Initialising architecture
usbcore: registered new driver hub
fb0: h1940fb frame buffer device
NetWinder Floating Point Emulator V0.97 (extended precision)
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Console: switching to colour frame buffer device 30x40
Real Time Clock Driver v1.12
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
Unable to handle kernel paging request at virtual address 371c2c6c
pgd = c0004000
[371c2c6c] *pgd=00000000
Internal error: Oops: 805 [#1]
Modules linked in:
CPU: 0
PC is at serial8250_register_ports+0x20/0x7c
LR is at serial8250_register_ports+0x14/0x7c
pc : [<c0013ca0>]    lr : [<c0013c94>]    Not tainted
sp : c3fdff94  ip : c3fdff94  fp : c3fdffac
r10: 00000000  r9 : 00000000  r8 : 00000000
r7 : c001e5e0  r6 : c02310e0  r5 : 00000000  r4 : 371c2c00
r3 : 00400040  r2 : c02310b0  r1 : 00000013  r0 : c02310e0
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  Segment kernel
Control: C000717F  Table: 30004000  DAC: 0000001D
Process swapper (pid: 1, stack limit = 0xc3fde104)
Stack: (0xc3fdff94 to 0xc3fe0000)
ff80:                                              00000000 c3fde000 00000000 
ffa0: c3fdffc0 c3fdffb0 c0013ed0 c0013c90 c001e544 c3fdffe0 c3fdffc4 c000883c 
ffc0: c0013e7c c01efa9c 00000000 00000000 00000000 c3fdfff4 c3fdffe4 c001f09c 
ffe0: c00087ec 00000000 00000000 c3fdfff8 c003dd20 c001f078 00000000 00000000 
Backtrace: 
[<c0013c80>] (serial8250_register_ports+0x0/0x7c) from [<c0013ed0>] (serial8250_init+0x64/0x88)
 r6 = 00000000  r5 = C3FDE000  r4 = 00000000 
[<c0013e6c>] (serial8250_init+0x0/0x88) from [<c000883c>] (do_initcalls+0x60/0xd8)
 r4 = C001E544 
[<c00087dc>] (do_initcalls+0x0/0xd8) from [<c001f09c>] (init+0x34/0xf0)
 r7 = 00000000  r6 = 00000000  r5 = 00000000  r4 = C01EFA9C
[<c001f068>] (init+0x0/0xf0) from [<c003dd20>] (do_exit+0x0/0x2fc)
 r4 = 00000000 
Code: ebfffff0 e59f4050 e3a05000 e59f304c (e584506c) 
 <0>Kernel panic: Attempted to kill init!
 <0>Rebooting in 30 seconds..arch_reset: attempting watchdog reset
ÿÿ